Open Beam Mitre Box
30
Likes
167
Downloads
1913
Views
Published on October 19, 2012
Description
If you are building with Open Beam you will need one of these. Has 45 degrees as well as 30 and 60 and is gapped for a standard hacksaw blade.
I recomment holding this in your hand on a solid work bench and taking your time with the cut. Use a 24 tooth hacksaw blade for a neat cut.
Open beam is a 15mm x 15mm aluminium extrusion that I am currently building with.
I recomment holding this in your hand on a solid work bench and taking your time with the cut. Use a 24 tooth hacksaw blade for a neat cut.
Open beam is a 15mm x 15mm aluminium extrusion that I am currently building with.
Instructions
Just print it out.
I used .35mm nozzle, 0.3 layer height, 25% fill (probably should use 50%).
I used .35mm nozzle, 0.3 layer height, 25% fill (probably should use 50%).
License
Open Beam Mitre Box by Wired1 is licensed under the Attribution - Non-Commercial - Share Alike license.
More from Wired1
More from Hand Tools
You must be logged in to post a comment.