PadStacker 5000
14
Likes
108
Downloads
1205
Views
Published on October 19, 2012
Derived from
Simple iPad Stand -3D printed
by eagleapex
Description
We use 5 iPads in the studio, and when you lay them out on the desk to charge, they take up a LOT of space.
Enter the PadStacker 5000. 5 iPads in an area only slightly larger than a single iPad.
Enter the PadStacker 5000. 5 iPads in an area only slightly larger than a single iPad.
Instructions
Print out a bunch of Eagleapex's "Simple iPad Stand" (Thing 4020) - 2 per iPad
Apply your choice of adhesive (I used acetone to weld the parts) and attach them toe-to-tail to create a rack.
Repeat for the opposite rack.
Optional: Securely mount your two racks to keep the spacing optimal.
Apply your choice of adhesive (I used acetone to weld the parts) and attach them toe-to-tail to create a rack.
Repeat for the opposite rack.
Optional: Securely mount your two racks to keep the spacing optimal.
You must be logged in to post a comment.
I'm confused, do I use the .stl file here, or for Thing 4000?
You can use either STL - they're both Eagleapex's 4020