Loading
Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

Tardis Box

by CWarlord87, published

Tardis Box by CWarlord87 Oct 19, 2012

Description

A tardis box with removable lid. Designed for girlfriend to use to keep things like dollar bills in. It was created by me in sketchup and created to scale and then scaled down in order to fit in a 3d printer. As i don't have a 3D printer till end of 2012, not sure how it will print out.

*Update: Made walls thicker so hopefully it should be more stable now.

Recent Comments

view all
Slic3r says there a hole in the stl of the body
Thank you for telling me. I was worried about how the walls would turn out so i'll try and fix that in next few days and upload it.
I printed it last night, the top came out great except I need to change the speed, but the box itself is a little too thin.  Hard to see in the picture I posted, but here's another one: https://picasaweb.google.com/lh/photo/EvspufPf-voWZHp07j2bItMTjNZETYmyPJy0liipFm0?feat=directlink

It's actually got holes where the panels join and it collapsed a little as I pulled it off the bed. I'll probably try putting a thicker wall on it tonight and give it another try.

More from Art

view more

Makes

Liked By

view all
Steampunk Single Digit Nixie Clock II

License

GNU - GPL
Tardis Box by CWarlord87 is licensed under the GNU - GPL license.

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

1. Print 1 of each file
2. glue the Tardis Bottom Lid into the bottom of the Tardis lid
Slic3r says there a hole in the stl of the body
I printed it last night, the top came out great except I need to change the speed, but the box itself is a little too thin.  Hard to see in the picture I posted, but here's another one: https://picasaweb.google.com/lh/photo/EvspufPf-voWZHp07j2bItMTjNZETYmyPJy0liipFm0?feat=directlink

It's actually got holes where the panels join and it collapsed a little as I pulled it off the bed. I'll probably try putting a thicker wall on it tonight and give it another try.
Thank you for telling me. I was worried about how the walls would turn out so i'll try and fix that in next few days and upload it.
You should split the 3 elements in 3 different stl so they can be printed independently in the smaller Cupcakes and Thing-o-Matics.
Thanks for the idea. I didn't think of that so i'll try and get that done and then upload the files
Top