by Alekseev_D, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Night Light Diamond.
Soft blue light.
Plug in ~220 V.
I disassembled the factory and took a night light plug.
Plug, and the holder of the ABS.
Diamond from transparent blue PLA. Only the perimeter.
Clipped to the top diamond.
Soldered Electrical: diode on 1000 V, resistor 100 kOm and the LED.
Plus LED (long leg) to the resistor.
Screw socket and holder.
Please note: I do not know how to lead the scheme in the long operation. Resistor can overheat.
Night Light by Alekseev_D is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Alekseev_D a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Alekseev_D would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).