Ultimaker - Ikea Dioder connectors
by Nicu, published
This is another set of rises that clip onto 6 mm ply (on my Ultimaker) that fit the Ikea Dioder 16670 (801.194.20 in Australia). Although very similar to another thing, they are not a derivative (my models are attached).
As the LED strips are bigger than the top opening on the UM, one axis will need to sit above the other.
Required: 8 off M3 button head set screw (6 mm long) and nuts.
Print (four of each), clean-up, attach metal clips, attach LEDs, attach connectors and push risers tight into corner.
Check for any collisions with your belt tensioners etc.
Liked ByView All
Give a Shout Out
Ultimaker - Ikea Dioder connectors by Nicu is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Nicu a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Nicu would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).