Alphabet Cubes
40
Likes
5714
Downloads
3251
Views
Published on October 24, 2012
This thing was Featured on October 25, 2012
Description
I wanted to have my godchild's name in toy blocks, so I made the whole alphabet.
Each cube is 50x50mm and has roudings of 2,5mm. You can't read the letters very good on those pictures, because the blocks had to lay down, with the letters facing upwards for printing. I added 1 file with all the blocks, just so you can see those letters. You can't print that file the way it is.
Each cube is 50x50mm and has roudings of 2,5mm. You can't read the letters very good on those pictures, because the blocks had to lay down, with the letters facing upwards for printing. I added 1 file with all the blocks, just so you can see those letters. You can't print that file the way it is.
Instructions
You can print them in the original size, or you could down-size them and print your own name in blocks, to put on your desk or glue them to anything you like ;-)
I have successfully printed my first cube, scale 1/1 (5 cm) on my ultimaker, with Cura:
- 230 °C
- 0,2 mm layer height
- 0,8 mm Wall thickness
- 0,6 mm Bottom/Top thickness
- 15 % infill
- 50 mm /S
Here you have the numbers: thingiverse.com/thing:33101
I have successfully printed my first cube, scale 1/1 (5 cm) on my ultimaker, with Cura:
- 230 °C
- 0,2 mm layer height
- 0,8 mm Wall thickness
- 0,6 mm Bottom/Top thickness
- 15 % infill
- 50 mm /S
Here you have the numbers: thingiverse.com/thing:33101
Working on a box to put 6 cubes in. But I'm having troubles with warping (even with PLA), because the bodem has rounded edges. I'll be trying with straight edges soon.
Still no success with the box. Not even with straight edges.