Loading

Simple Hinge

by zklogan, published

Simple Hinge by zklogan Oct 24, 2012

Description

A simple hinge design for 3D printer. Untested as of yet. I suspect that the central pin would be stronger if printed separately or replaced by metal/wood/acrylic dowel.

Recent Comments

view all
Use a M3 screw and put a captive/captured nut on the other end.   Another idea would be to use the pin-peg library and so it can snap together.  Those pin pegs print strong and should also do the trick.

More from 3D Printing

view more

Liked By

view all

Tags

License

Simple Hinge by zklogan is licensed under the Creative Commons - Attribution license.

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

Parts should slide together and move. May require some sanding depending on resolution of printer

Use a M3 screw and put a captive/captured nut on the other end.   Another idea would be to use the pin-peg library and so it can snap together.  Those pin pegs print strong and should also do the trick.
Top