Loading

KnuckleStand for Nexus 7 Tablet

by gbward, published

KnuckleStand for Nexus 7 Tablet by gbward Oct 24, 2012

Description

This is a cross between a set of brass knuckles and a tablet stand.

Just snap it or slide it onto your Nexus 7 and you've got a versatile stand and finger hold for your tablet.

It will support your tablet in the horizontal or vertical position.

Or, slip your fingers though the holes for a more confortable way to hold your tablet.

The IGS file is included so that this can be adapted to other 7 inch tablets.

Recent Comments

view all
Scaled to 92% fits my 2013 Nexus 7 very well; thank you!
Warning/Careful - if your first layer is squishier than the others (i.e. wider), this might happen to you:  gashes cut in the silver (plastic) bezel of the tablet.  Hit the inside edges of the stand with sandpaper or a file to smooth any sharp edges.
See my derivative for a ready-to-go MM scale version.

Thanks to gbward for the excellent design!

More from Tablet

view more

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

You may need to tweak the interface with an nail file to get the fit just right.

Scaled to 92% fits my 2013 Nexus 7 very well; thank you!
Warning/Careful - if your first layer is squishier than the others (i.e. wider), this might happen to you:  gashes cut in the silver (plastic) bezel of the tablet.  Hit the inside edges of the stand with sandpaper or a file to smooth any sharp edges.
How did you set the scale of this object? Its getting imported very very small.
See my derivative for a ready-to-go MM scale version.

Thanks to gbward for the excellent design!
Yes, scale factor from inches to milimeters is 25.4.  Good luck! 
worked great!
Top