by 15PerezM, published
This is a model of the Borderlands character Claptrap. The wheel rolls and requires some assembly.
Note: This piece was made on a Makerbot Replicator and using 1.75mm black ABS plastic.
Open the file "the claptrap parts" in the Replicator G program.
Rotate the piece so the Claptrap's head is on the platform.
Generate the G-Code and begin the build. (This will take a while to print.
Using acrylic glue, insert the arms into the holes that match its size.
Glue the axle to the rounded side of ONE leg bracket.
Place the wheel over the axle and glue the second leg bracket onto the other side of the axle.
- Insert the two leg brackets into the matching holes and glue it together.
Note: If a part breaks or is lost, create it using the appropriate attached file. (For example, if the axle breaks, download the "axle" file and build that.) "the claptrap parts" is all the parts in one file.
Liked ByView All
Give a Shout Out
Claptrap by 15PerezM is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving 15PerezM a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure 15PerezM would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).