Evolution dock adapter
by buffington, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I adjusted the original adapter to have a slightly tighter hole for the end of the Lightning cable.
I also added another part - the cable lock. It allows the cable to bend while also keeping it tucked in nice and tidy below the dock.
I printed the parts on a Makerbot Replicator with a layer thickness 0.2mm, 100% fill using PLA. I found some screws from my box of many that fit the holes available in the dock for the cable lock down part. I have no idea what size they are.
Evolution dock adapter by buffington is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving buffington a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure buffington would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).