Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
Ramps 1.4 LCD Shield Fabster 3D Box
20
Likes
691
Downloads
3785
Views
Published on October 25, 2012
Description
the mission to "Finish off my printer" continues, with the Ramps/Arduino/LCD Shield box. I was unable to locate an existing RAMPS box that fit the LCD Shield, so made one.
Instructions
Print it, mount it.
Another revision to the box made this evening, this time moving the mount hole slightly, adding more fan clearance, adding a grille of sorts, and a wiring hole for LCD Shield.
Wiring coming together as per new pics this evening, still to design/print the lid and make a couple of adjustments to the box.
No vitamins needed, to follow is a cable guide for the LCD wiring up to the LCD Panel, some other cable management, and a lid.
Another revision to the box made this evening, this time moving the mount hole slightly, adding more fan clearance, adding a grille of sorts, and a wiring hole for LCD Shield.
Wiring coming together as per new pics this evening, still to design/print the lid and make a couple of adjustments to the box.
No vitamins needed, to follow is a cable guide for the LCD wiring up to the LCD Panel, some other cable management, and a lid.
You must be logged in to post a comment.
License
Ramps 1.4 LCD Shield Fabster 3D Box by JBFromOZ is licensed under the Attribution - Share Alike - Creative Commons license.
More from JBFromOZ
More from 3D Printer Parts
if you still have problems, irc #reprap on freenode.net has many helpful souls