Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
AO x end clamp Mod
by RiC0MD, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a modified x end clamp from the AO-101 printer parts. I was running into an issue where these were needed to fix my Z wobble, but they were touching my motor couplers. I needed more clearance to get the nozzle at proper height above the build platform. This was a very simple mod to the scad files to cut away part to make a gap. All credits go to AO.
Replace X clamps.
Move the bottom pillow block from top to the new clamp.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
AO x end clamp Mod by RiC0MD is licensed under the GNU - GPL license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving RiC0MD a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure RiC0MD would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).