Strong LM8UU Holder
15
Likes
268
Downloads
1439
Views
Published on October 28, 2012
Derived from
Slim LM8UU Holder Parametric
by jonaskuehling
Description
(Updated 3 March 2013)
This is a lm8uu bearing holder for the y axis of a Mendel, Prusa, or Air 2 reprap printer.
It is inspired by Jonas Kuheling holder, which fixes the bearin with screw and nut but is designed to be printed horizontally, so that it does not break when tightening the screw.
I have tried to break it and I have not been able (with a bearing inside)
This is a lm8uu bearing holder for the y axis of a Mendel, Prusa, or Air 2 reprap printer.
It is inspired by Jonas Kuheling holder, which fixes the bearin with screw and nut but is designed to be printed horizontally, so that it does not break when tightening the screw.
I have tried to break it and I have not been able (with a bearing inside)
Instructions
This thing has been desiged in OOML (Object Oriented Mechanincs Library). It is parametric, you can change the parameters con the main.cpp and compile and run.
For changing it you need to download and install the C++ OOML from github.com/avalero/ooml . Tutorials are at iearobotics.com/oomlwiki .
The code of this and other things are at github.com/avalero/3dthings
The STL included has the following parameters:
-Base Thickness: 4mm
-Wall Thickness: 3mm
For changing it you need to download and install the C++ OOML from github.com/avalero/ooml . Tutorials are at iearobotics.com/oomlwiki .
The code of this and other things are at github.com/avalero/3dthings
The STL included has the following parameters:
-Base Thickness: 4mm
-Wall Thickness: 3mm
More from avalero
More from 3D Printer Accessories
You must be logged in to post a comment.