by cerberus333, published
My simplified model based (loosely) on Bodiam Castle.
My intent was to make a model
which can be scaled on the smaller side. and capture the feel of the original.
The castbod5.stl print came out a bit rough on the small square tower tops.
I remodeled and have posted castbod6.stl.
the changes are the following
the 4 square towers have thicker top sections.
the inner top of the wall is thicker
the 2 big square towers have flatter tines.
I added more "windows" to the outer walls.
the tops of the round towers have a ring.
I test printed the second version using these settings.
80mm/sec (replicator accelerated marlin)
230 degrees extruder
its a very light weight print for how big it is (65 grams)
Liked ByView All
Give a Shout Out
Bodiam Castle by cerberus333 is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving cerberus333 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure cerberus333 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).