AVRDragon ICE enclosure / case
by MaikaiGuy, published
Atmel offers a very low cost in-circuit-emulator called the AVRDragon. Unfortunately, it does not have an enclosure, so one needs to be careful not to short out the ICE with an errant bit of clipped wire or something.
This was my first project with a new Makerbot Replicator dual head.
The lid has a hole in it so the status LEDs can be seen. I intend to get some clear filament to see if I can make a light pipe from the LEDs to the surface of the lid. But I would not define this as a work in progress. The light pipe thing is more of a next learning step for me (dual extrusion).
Pretty simple. The AVRDragon board drops right in snuggly with a 10pin ribbon cable attached (JTAG connection). I initially had mounting standoffs in the box, but removed them... no need for them and the box got thinner.
Liked ByView All
Give a Shout Out
AVRDragon ICE enclosure / case by MaikaiGuy is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure MaikaiGuy would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).