THERMINATOR High Watt output 3mm Filament .5mm nozzle
by REOCON, published
.5mm hot end
with 2 , 5 watt power resisters
1" x .5 brass square stock
PEEK Body with 3/8 brass threaded internal
1/4" outside Diameter Teflon tube with .3mm inside diameter
Still working on brass heat zone design
Have run for 2 months with no clogs.
Am working on updated specs and photos.
Start of Build list:
Newark Part Number:
Manufacturer Part No:
Liked ByView All
Give a Shout Out
THERMINATOR High Watt output 3mm Filament .5mm nozzle by REOCON is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving REOCON a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure REOCON would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).