Spatula - Kitchen Series
by ajolivette, published
I'm starting a series of 3D things, which are designed to replace what you would buy from the store. This is the kitchen series. First on the list, a large flat spatula. More to come.
This is the beginning of my series of things which are designed to replace things you would normally buy from the store. I'm on a mission to make 3D things everyone will want to print. For now, things that everyone needs, which will then become things everyone can't do without.
I'll start with this spatula. Designed to be printed and functional. I creaed it in two pieces, so it can fit in a build with a 10X10X12 foot print, which of course is what my printer can do, but it can be scaled of course to fit in yours too. I included a bolt and screw you can print, but you can of course use a real bolt and screw. Once the one I have printing now prints, in 8 hours, I'll know if it all works well together, and I'll post some nice pictues of that. For now, I'll include render.
Also, I would think you can also use glue on the bolt too.. right? No reason to take it apart once it's been put together.
I also added a second version, which you may prefer. I do. The first version, depending on how you print it, the handle meets the spatula flat portion at the point of the layer you print, so it can break at that point. I added some additional support on v2, which makes it stronger there, at least via my printer.
I'm currently using the Spatula in the house to cook with, so, it does function. It does have a lower melting point, but so do some of my other plastic cooking supplies.
Liked ByView All
Give a Shout Out
Spatula - Kitchen Series by ajolivette is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving ajolivette a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ajolivette would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).