Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
Twilamp
20
Likes
203
Downloads
1198
Views
Published on October 30, 2012
Description
My first 3D-printed design: a lampshade.
Modeled with Blender 2.6.
Modeled with Blender 2.6.
Instructions
Test print was done with 0.5mm layer thickness and took 13 hours on BFB 3D Touch with 10% infill. I had to add vertical supporting walls in the lower part of the sphere, but did not put them close enough so there was some printing in the air.
You must be logged in to post a comment.
scroll
on
October 30, 2012
said:
It was really .5 with default feedrate (which is pretty slow). The size is 12cm and weight is about 150g. A hollow sphere of this size would print much faster.
scroll
on
October 30, 2012
said:
It was really .5 with default feedrate (which is pretty slow). The size is 12cm and weight is about 150g. A hollow sphere of this size would print much faster.
cyclone
on
October 30, 2012
said:
.5mm or .05mm? .5mm is pretty coarse and for 13 hours I think you'd be printing something the size of a basketball. :-)
License
More from Decor
It was really .5 with default feedrate (which is pretty slow). The size is 12cm and weight is about 150g. A hollow sphere of this size would print much faster.
So how big of a nozzle did you use? like a 1mm or .8mm?