Cooking Spoon - Kitchen Series
by ajolivette, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I'm continuing the series of 3D things, which are designed to replace what you would buy from the store. This is the kitchen series. This is second on the list, a large flat spatula.
This is continuing my series of things which are designed to replace things you would normally buy from the store. I'm on a mission to make 3D things everyone will want to print. For now, things that everyone needs, which will then become things everyone can't do without.
This cooking spoon is the second in the series. Designed to be printed and functional. I creaed it in two pieces, so it can fit in a build with a 10X10X12 foot print, which of course is what my printer can do, but it can be scaled of course to fit in yours too. I included a bolt and screw you can print, but you can of course use a real bolt and screw. Once the one I have printing now prints, in 6 hours, I'll know if it all works well together, and I'll post some nice pictues of that. For now, I'll include a render.
Also, I would think you can also use glue on the bolt too.. right? No reason to take it apart once it's been put together.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Cooking Spoon - Kitchen Series by ajolivette is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving ajolivette a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ajolivette would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).