Gothic Window - Lego-compatible 1x6x4
31
Likes
495
Downloads
2162
Views
Published on October 30, 2012
This thing was Featured on October 31, 2012
Description
Gothic Window Frame that fits with Lego Bricks and can be printed on any 3D printer. Designed with Cubify Invent and printed on CUBE printer. The window size is one brick deep, 4 wide and 6 high. Use Lego arch element for top part of window.
Instructions
Print out with support strucuture. Thickness 0,2mm more to allow sanding of the outer side of the window. Designed in metric system (mm).
Originally designed for and printed on CUBE from 3D Systems.
Originally designed for and printed on CUBE from 3D Systems.
You must be logged in to post a comment.
UechiMike
on
October 31, 2012
said:
Posted a pic of my print. It came out OK. Sliced with SF050 with .3mm layer height. It doesn't fit tight and would need to be scaled up ever so slightly Looks pretty good. Not sure if it's due to ABS shrinkage or the model size...SF also didn't keep the sides of the base in there so that doesn't help either.
UechiMike
on
October 31, 2012
said:
Posted a pic of my print. It came out OK. Sliced with SF050 with .3mm layer height. It doesn't fit tight and would need to be scaled up ever so slightly Looks pretty good. Not sure if it's due to ABS shrinkage or the model size...SF also didn't keep the sides of the base in there so that doesn't help either.
License
Gothic Window - Lego-compatible 1x6x4 by Dirk1313 is licensed under the Attribution - Share Alike - Creative Commons license.
More from Dirk1313
More from Construction Toys
Cubify Invent looks like it's windows only. I might try it in Wine. $50 isn't bad if it works good.
I'll try to get another pic with more detail - the lighting wasn't great and black filament is hard to photograph. I did print this on "low quality" high speed so it's not the best but I think it still looks pretty good.