Tablet Stand - Halloween Monster Edition
9
Likes
281
Downloads
2216
Views
Published on October 31, 2012
This thing was Featured on October 31, 2012
Derived from
iPad Stand
by xtreme712
Description
This tablet stand looks like a teethed Monster. Print it in orange for a Halloween feeling!
"This Monster Tablet Stand will bite every IPad it can reach". So use it at your own risk.
1. Tablet_Stand_Ablapo.scad - with edges
Thanks to xtreme712 and his iPad Stand version. I changed some dimensions and cut holes into it.
2. T_S_Halloween.stl
First I used Meshlab for Remeshing. Then I used Topmod for cutting the edges and smoothing. Finally the tablet stand monster was created - the Halloween Edition.
"This Monster Tablet Stand will bite every IPad it can reach". So use it at your own risk.
1. Tablet_Stand_Ablapo.scad - with edges
Thanks to xtreme712 and his iPad Stand version. I changed some dimensions and cut holes into it.
2. T_S_Halloween.stl
First I used Meshlab for Remeshing. Then I used Topmod for cutting the edges and smoothing. Finally the tablet stand monster was created - the Halloween Edition.
Instructions
After I printed T_S_Halloween.stl, I realized that you can adjust the rotation very easy with one hand. Maybe that's because of the thermal shrinking of the boarder region.
I used a .35 nozzle with 80% infill, 6 perimeters, 5 solid layers for slic3r.
I used a .35 nozzle with 80% infill, 6 perimeters, 5 solid layers for slic3r.
License
Tablet Stand - Halloween Monster Edition by Ablapo is licensed under the Attribution - Share Alike - Creative Commons license.
You must be logged in to post a comment.