Totem Pole 1
by Thetribster, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Another totem pole that I've had for a number of years. Notice what one of the entities is holding in his hands.
Print it with minimal fill 10-15% and the rest defaults should produce a nice print. The measurements according to NetFabb are 5" (125mm) in the z-axis, an 1" (28mm) on the y-axis and 2.25" (60mm) at the base in the x-axis direction.
Totem Pole 1 by Thetribster is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Thetribster a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Thetribster would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).