Jack Skellington Clocks
by antpgomes, published
Halloween Special...just requires a lasercut shape, a clock and hot glue (paints are optional)
A piece of plywood (4mm does the trick)
A clock: i used these (http://www.lgglobal.biz/ebay/xpicsd/lgct251d.jpg), widely available on NBA clocks at dollarstores or ebay
Optional: paint :)
Just paint Jack if you will (I kinda prefer the natural wood)
Drill a 6mm hole where the "nose" is
Hot glue it to the plywood
Shouldn't take you more than 10min!
Hope you like them!