Hand Grenade Model
by sterling500, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A simple hand grenade model that can be printed in 4 parts. I'm still working on the pin for it.
Print at 50% from what the STL loads as.
I created a STL for the pin but it looks a bit too thin to print. I will give it a try. Maybe better to actually use a metal pin.
Also there is a location in the top for a spring to be installed. This will push the handle up when the pin is removed.
Print from STL at 50%.
The pin for the handle is a bit small to print properly so I suggest just using a metal pin like a small nail.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Hand Grenade Model by sterling500 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving sterling500 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure sterling500 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).