Loading

Nexus 7 Stand with Wire Slot

by KingHelps, published

Nexus 7 Stand with Wire Slot by KingHelps Nov 1, 2012

Description

There's some great Nexus 7 stands here on Thingiverse already but I wanted one with a slot for the charger wire so that it could charge whilst in the stand.

Recent Comments

view all
Woo! Glad you like it :)
considering my entire print shifted about 2-3cm up, the stand came out pretty good, had to use a heat gun to widen the hole for the USB connector but im content with the print :D
i did 10% but i dont really have the speed in slic3r cranked up a lot, ever since i built my prusa ive used 20mm/s for all the speeds, but i eventually do plan on increasing it lol

More from Tablet

view more

Liked By

view all

Tags

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

1) Print. Consider using a low infill such as 10% to save material.

2) Enjoy.
Perfect way to discover my extruder has locking up issues 3 hours into printing lol.

just 3 hours left :P
Oh nooo! Since it's mostly volume you can get away with a low infill, should shave off some time. I used 10% but you could probably use as low as 5% without too many problems and the print should take an hour or so.
i did 10% but i dont really have the speed in slic3r cranked up a lot, ever since i built my prusa ive used 20mm/s for all the speeds, but i eventually do plan on increasing it lol
considering my entire print shifted about 2-3cm up, the stand came out pretty good, had to use a heat gun to widen the hole for the USB connector but im content with the print :D
Woo! Glad you like it :)
Top