by DarkAlchemist, published
Need a four hole button? Print it.
Since this is an object that can be used to keep you from being arrested for indescent exposure I suggest using no less than 50% infill, and really 75%-100% should be used if you have the spare material handy. If using 50% infill use the honeycomb design as it is the strongest with the least amount of material (Bees have known this since the begininng of time).
Since this is a cutting object and you will be applying presure to cut through the cookie dough I suggest using no less than 50% infill, and really 75%-100% may be needed if you have the spare material handy. If using 50% infill use the honeycomb design as it is the strongest with the least amount of material (Bees have known this since the begininng of time).
I added a repaired version but in reality the original had nothing wrong with it but when saving to the STL format it seems to have brought in minor issues (nurbs to triangles). Basically the STL format goes wonkers with minor issues while being translated from nurbs to triangles so any high definition models come with minor issues.
Liked ByView All
Give a Shout Out
Button by DarkAlchemist is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving DarkAlchemist a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure DarkAlchemist would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).