InfintyParadiso Campaign - Maglev Train Model A
by Ssmigielski, published
Prototype Design for a Maglev Train at 28mm based on the template provided by the Infinity website...
Three part print, assembled SKP provided for assistance.
Update - [11-27] Forgot to include the coupling for the cargo cars.
Included in new file.
Cargo Car half (Print 2 to make full) included.
Update - [11-28] Crate designed to print hollow.2 should print to fit the car width, but no gap planned, might need to sand down "back" of crate to fit nicely.
Update 12-1, 12-10 - rear of engine had a design flaw when i ran it through slicer. should be fixed now.
Update 3 - 8 - front of engine gave me trouble slicing, redesigned, should be fixed now.
Liked ByView All
Give a Shout Out
InfintyParadiso Campaign - Maglev Train Model A by Ssmigielski is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Ssmigielski would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).