Easier to Print Simonious' Supa-Flat X-Carriage
by Ember, published
This is a derivitive of Simonious' Supa Flat x-carriage that I have modified it for printability. His original x-carriage has nut traps that transitioned to holes, but he did not allow your slicer to generate any kind of bridging to print the hole on top of the larger nut trap, resulting in additional clean-up.
Pick the STL that matches your layer height and print. Use Simonious' belt clamps and http://www.thingiverse.com/thing:15218 for the bushing holders.
Liked ByView All
Give a Shout Out
Easier to Print Simonious' Supa-Flat X-Carriage by Ember is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Ember would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).