Lazy susan parametric track
by JamesAdams, published
I wanted to take fully rotating pictures of objects. for example: http://www.nickisdesign.com/?selectImage=260
I created the track using OpenScad based on a lazy susan that I got at the hardware store.
Each divot in the track is at a 5 degree mark.
Liked Byview all
Give a Shout Out
Link for the lazy susan http://www.amazon.com/Square-Bearing-6-x/dp/B0006LBVDS/ref=pd_sbs_indust_3/183-0071837-3639253
I used 4 / 3mm x 20mm countersunk screws to mount the track to the lazy susan.
The stl is set up to be printable on a 100mm x 100mm print bed