by PSUReprap, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a side mount adapter for the RAMPS control board. This design features a multi-bar mounting system which allows for maximum stability of the board while the printer is in use.
Note: This mount is only applicable on a printer with frame bars aligned at a 60 degree angle.
Attach the mount to the lower frame of your printer using either zip ties or an equivalent method. Then attach the RAMPS board to the mount.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
RAMPS Mount by PSUReprap is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving PSUReprap a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure PSUReprap would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).