little box to isolate power connector
by LineKernel, published
this is a small box for a standard power connector
so there is the main box , and its cover (back of the connector) ,
you will have to drill the back cover to feat your cable exit needs (depending on their diameters) and
you will need to drill the back cover where the screws goes (so you can choose your diameter : no much room here ,choose small screws )
Liked ByView All
Give a Shout Out
little box to isolate power connector by LineKernel is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure LineKernel would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).