by dinovski, published
An adaptor to prevent microplates from moving while using the benchtop tool 'iPipet' (freely available at: http://ipipet.teamerlich.org/)
This design is for right-handed pipetting.
about the files:
The parasolid and STL files are for an iPad; the .STEP and .IGS files are for a Samsung Galaxy Tab 4.
Designs by: http://www.zaksdesign.com/
The white adaptor was printed using sandstone and the purple using PLA. The sandstone printed more cleanly but the PLA is a bit sturdier and less expensive (~$30 versus $50).
Liked ByView All
Give a Shout Out
iPipet adaptor by dinovski is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure dinovski would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).