Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
by cerberus333, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Sarcophagus02 is due to my dissatisafaction with my earlier model's face looking like a topographic map. I also wanted this to be a bit more future/retro/deco.
The model will be a tight fit and will require some light sanding
on the inside of the lid.
it needs support on the inside of the lid.
I had separation cracks in the big print,
This is probably due to the garage temperature.
I am testing with a smaller print.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Sarcophagus02 by cerberus333 is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving cerberus333 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure cerberus333 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).