This Thing is currently under moderation for violating the Thingiverse Terms of Service.
Files and images for this Thing are currently unavailable.
Files and images for this Thing are currently unavailable.
AR-15 M4A3 Upper Receiver
-
Likes
-
Downloads
-
Views
Published on November 9, 2012
Description
This is an M4A3 upper receiver from an AR-15. After printing a lower I wanted to print an upper more or less to see if it would fit.
All I did was take the IGES model from CNCguns.com and make it a sliceable STL.
All I did was take the IGES model from CNCguns.com and make it a sliceable STL.
Instructions
This is a purely decorative piece. The argument over whether or not lowers can be printed and used is valid, this piece however is completely unsuitable for use in a live firearm.
I printed the model upside down, but you might want to rotate it to print in a different orientation.
I printed the model upside down, but you might want to rotate it to print in a different orientation.
License
AR-15 M4A3 Upper Receiver by tenlow is licensed under the Attribution - Share Alike - Creative Commons license.
More from Sport & Outdoors
You must be logged in to post a comment.