Frame Brace for Prusa Mendel
by tosjduenfs, published
Simple frame brace for Prusa Mendel. Helps reduce z wobble with high head speeds.
The vitamins you need for one complete frame brace are a length of M8 threaded rod of 5/16" threaded rod (110mm length is shown in the photo) and ten M3x20 screws and nuts or 4-40x0.75" screws and nuts.
Print two pairs of the frame braces to make one complete brace, assemble as shown in the photo.
These parts were made in SolidWorks and repaired in Netfabb to ensure they are perfectly manifold.
Liked ByView All
Give a Shout Out
Frame Brace for Prusa Mendel by tosjduenfs is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure tosjduenfs would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).