#6 lock nut holder tab
by FractalVortex, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a upgrade to the RepRap Prusa. Becoming frustrated having to grab my pliers to level my bed, I invented this. This thing permanently holds the lock nut and also provides a tab to eliminate pliers.
When I printed the part, the opening was smaller than the nut. I solved this very carefully with a lighter. I gently heated the back of the lock nut and the plastic. I used the metal part of the lighter to push in the lock nut. The result was a solid lock nut with a convienient tab to adjust.
#6 lock nut holder tab by FractalVortex is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving FractalVortex a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure FractalVortex would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).