60/11 Drive gears for Adrian's NEMA17 Geared extruder
2
Likes
708
Downloads
524
Views
Published on June 25, 2010
Description
This is my revised set of gears for Adrian's NEMA17 geared extruder.
This is a gear profile I use when I design gears for paper shredders, the gear profile meshes smooth and without play between the gears.
The drive gear uses a 1/4" shaft.
Two 60 tooth gears files are posted,Rev1 can be printed without a support material Rev2 is for printing on a machine with support material.
Enjoy!
This is a gear profile I use when I design gears for paper shredders, the gear profile meshes smooth and without play between the gears.
The drive gear uses a 1/4" shaft.
Two 60 tooth gears files are posted,Rev1 can be printed without a support material Rev2 is for printing on a machine with support material.
Enjoy!
Instructions
No instructions provided.
License
60/11 Drive gears for Adrian's NEMA17 Geared extruder by CdnReprap is licensed under the Attribution - Non-Commercial - Share Alike license.
More from CdnReprap
I printed the small gear and the rev1 gear...wow this gear set works so smooth, seems to make my machine print just right :-D thx for posting