Loading

GRBL Tidy Case - Clamping Version

by goopyplastic, published

GRBL Tidy Case - Clamping Version by goopyplastic Nov 11, 2012

Description

Interim version of the GRBL Tidy case, this version uses a clamping mechanism to retain the limit and stepper cables. You may need to add sleeving / heatshrink to get the proper diameter for the clamps. I am working on a new version that will replace this with a pcb breakout.

Recent Comments

view all

I added 2 front post files, one laying down one standing up depending on how you prefer to print it.

The design is meant for a 70mm fan. Sorry about the posts I will upload them today if I can.

1. I printed all the STL parts, but like kovo have found that the non-clamping posts are missing.
2. Is this design for a 60mm or 65mm fan?

More from Tool Holders & Boxes

view more

Makes

Liked By

view all

Tags

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Comments

You must be logged in to post a comment.

yoon on Apr 1, 2013 said:

1. I printed all the STL parts, but like kovo have found that the non-clamping posts are missing.
2. Is this design for a 60mm or 65mm fan?

goopyplastic on Apr 2, 2013 said:

I added 2 front post files, one laying down one standing up depending on how you prefer to print it.

goopyplastic on Apr 1, 2013 said:

The design is meant for a 70mm fan. Sorry about the posts I will upload them today if I can.

kovo on Dec 31, 2012 said:

Is this case missing a post design? for the posts that don't have cable clamps? Also, the orientation of the top and bottom (building from the edge up) is difficult on the bottom, and nearly impossible for the top. Any chance they can be rotated to lay flat?

goopyplastic on Jan 2, 2013 said:

Sorry I am a little lazy with putting the STL's in the correct orientation, so some reason my CAD program rotates them on export. I have uploaded a correctly rotated top / bottom piece.

Top