Vertical PCB Mounting Bracket (Parametric)
by CodeCreations, published
This little bracket provides an easy way to mount a PCB vertically. It includes a small wire clamp that can be used to hold PCB wires in place. I use it to hold a small 1" x 0.5" PCB that has a bank of header pins for X, Y, Z, and E motors. (See photo.)
Set User-defined values, render, and print. Insert the PCB in the channel and route the wires between the mounting holes. Place the wire clamp on top and mount using the holes. You may need to tweak the values a bit for a snug fit.
Liked ByView All
Give a Shout Out
Vertical PCB Mounting Bracket (Parametric) by CodeCreations is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure CodeCreations would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).