by DanLuc, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
So my puppy has picked a few of those caps from the spring doorstop that prevents the door from smashing into the wall.
Made a new one and printed 3 so far, replacing them all.
Might need a drill to make sure it fits your but on a standard spring doorstop it should fit snug. My printer isn't as precise so I had to tap them on the spring with a hammer. But all in all it works really well.
Also I included the SolidWorks file so you can make changes. Cheers.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Doorstop Bumper by DanLuc is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving DanLuc a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure DanLuc would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).