Mendel Z Knob
by Lenbok, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
There are plenty of options for a manual Z axis adjustment knob for a cupcake, but I haven't seen one for a mendel yet. I'm still getting my mendel up and running but wanted to manually move the Z up and down a bit.
Print it out and screw it straight on to one of your Z-axis threaded rods. You may have to shorten the M4 bolts going through the z-bar-top-clamps if you have them fitted. Heck, do one for each threaded rod for bonus points!
Mine turned out plenty tight enough, but I guess you could add a grub screw if yours is a bit loose.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Mendel Z Knob by Lenbok is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Lenbok a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Lenbok would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).