Mounted Deer / Reindeer Head
by phenoptix, published
This Christmas will be the Christmas of the laser cutter, maybe next year it will be the Replicator Christmas. I've seen these (or similar) either for sale or in shop displays and wanted to cut one for myself. I found a 3d model on Sketchup (http://sketchup.google.com/3dwarehouse/details?mid=cf1d7aeec6aed98ab9f437bcb24b35f) which seems to predate anywhere that is selling the model. Exploded and printed it flat then reworked the model for 3mm materials.
The scale allows it to be cut from two sheets of A4 size.
Marked as a derivative, however it's more of an inspired by!
With the acrylic version, the slots on the back needed reversing as they don't hold together as well as the ply version and gravity is not your friend. So I've added a V2 with corrected slots and also a loop for screw / picture pin mounting.
After a number of requests! http://www.phenoptix.com/products/laser-cut-deer-reindeer-rudolph-head
Cut out and slot together!
Liked ByView All
Give a Shout Out
Mounted Deer / Reindeer Head by phenoptix is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure phenoptix would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).