Curtain Rod Hanger for 1 1/4
by MrAdventure, published
This thing is for curtain rods that are generally found in a closet, the thick wooden dowel type.
I can buy the dowels for $5, make these hangers for $0.75 each, and will be uploading end pieces that will probably be around that price as well.
Painting the wood to match the plastic (I printed in gold, although I'll be honest it looks more like brown,) was another $13 for a quart. Overall the price per curtain setup will be around $10, compared to a minimum of $20 in the store, (more if the end pieces are fancy at all.)
This has already been run through cloud.netfabb.com, so it shouldn't need any tweaking. Please let me know if the upper area is a little diagonal on yours, it doesn't seem to be in the file, but the last few I have printed were a tiny bit off.
Take it slow when screwing in to prevent splitting.
I have insulated curtains hanging on mine now, no problems.
Liked ByView All
Give a Shout Out
Curtain Rod Hanger for 1 1/4 by MrAdventure is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving MrAdventure a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure MrAdventure would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).