Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
608 bearing version of Actuator
7
Likes
569
Downloads
960
Views
Published on November 15, 2012
Derived from
Linear Actuator
by TrinityLabs
Description
The thrust bearings replaced with the more common 608 bearing. Not most 608s aren't designed for thrust, some are. That said even if they aren't designed for thrust at least now you can print and use this with bearings you probably already have. Note deep groove 608s have a fair thrust rating. For example: vxb.com/page/bearings/PROD/kit8780
If you decide to use an M8 threaded rod for your leadscrew you'll need: thingiverse.com/thing:34826
Proof of concept video here: youtube.com/watch?v=Qap55vV6yhM
If you decide to use an M8 threaded rod for your leadscrew you'll need: thingiverse.com/thing:34826
Proof of concept video here: youtube.com/watch?v=Qap55vV6yhM
Instructions
No instructions provided.
You must be logged in to post a comment.
License
608 bearing version of Actuator by TrinityLabs is licensed under the Attribution - Share Alike - Creative Commons license.
More from TrinityLabs
More from 3D Printer Parts
Updated the .skp and the motor mount STL to make a little more room for couplers, one of the testers had trouble fitting their coupler in there.