Shower Organizer Shelf Wedges
by jessed, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a set of replacement wedges used to position the baskets/shelves in those tall pole-style shower organizers. The pole goes from the bath to the ceiling, and the shelves slide up and down it. The shelves are kept in place using a pair of small plastic wedges that fit between the pole and the shelf.
This looks like the right sort of thing:
I print these in ABS plastic at .2mm layer height.
There's a thin layer of plastic at the bottom to help the parts stick to the build platform -- it can be easily trimmed after printing.
I'm including the OpenScad source as well, in case you need to tweak anything.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Shower Organizer Shelf Wedges by jessed is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving jessed a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jessed would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).