Honey Comb iPhone 5 Plug Case
13
Likes
284
Downloads
1666
Views
Published on November 18, 2012
Derived from
Honey Comb iPhone 5 Case
by The3DLibrary
Description
Finally you will be able to have a truly unique case, with over 94 million possibilities (Approx) no two people will have the same case hopefully.
Gromfrog.com
You can buy the case along with plenty of plugs from shapeways below
Case: shapeways.com/model/781207/iphone-5-honey-comb-plug-case.html?li=
Plugs: shapeways.com/model/781250/iphone-5-honey-comb-case-plugs.html?li=
We would love some feedback and would love to see what combos people come up with.
Gromfrog.com
You can buy the case along with plenty of plugs from shapeways below
Case: shapeways.com/model/781207/iphone-5-honey-comb-plug-case.html?li=
Plugs: shapeways.com/model/781250/iphone-5-honey-comb-case-plugs.html?li=
We would love some feedback and would love to see what combos people come up with.
Instructions
Print both case and Plugs with High infill, When inserting plugs you may find they are a tight fit, just keep pushing until they are in place but if you cannot get them in at all you may have to sand them down, but if the plugs do not fit very well and are loose you may want to glue them in place.
You must be logged in to post a comment.
License
Honey Comb iPhone 5 Plug Case by The3DLibrary is licensed under the Attribution - Creative Commons license.
More from The3DLibrary
More from Mobile Phone
I like the overall idea, although I could see using hex-plugs on a larger scale, say for printed palago pieces in a laser-cut board.