Scorpion Iphone 4 Snap Fit Case/Bumper

by BrandonW6, published

Scorpion Iphone 4 Snap Fit Case/Bumper by BrandonW6 Nov 21, 2012


This is a Snap Fit Case/Bumper for an iPhone 4 that has a scorpion insignia on the back. It's a present for my friend's birthday. She likes scorpions. (Updated!)

Recent Comments

view all
i wish i could have a phone so i could make that
Could you send the Inventor Files
Thanks Brandon! My first print that got printing in the quality i was looking for! (Took me a while......) ????

More from Mobile Phone

view more

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag


Print it out, clean up any rough spots with sandpaper. Pop in your iPhone and enjoy.

Shortly I will be adding a slightly beefed up version that is designed to be a little stronger and hold the phone even more securely.

[Update] Case Version 2:
Per request in the comments, I have uploaded a thicker version of the case with the scorpion facing the other direction.

i wish i could have a phone so i could make that

<p>Could you send the Inventor Files</p>

<p>Thanks Brandon! My first print that got printing in the quality i was looking for! (Took me a while......) ????</p>

<p>what infill do you recommend?</p>

<p>I used 0 infill the second time, with infill, my printer went berserk filling the thin walls.</p>

<p>I had mine set to 0.25 infill. <br></p>

<p>Alright, ill have a pic of mine up in a few hours when it gets done.. the whole print felt creepy lol<br>haven't quite got the temps set right so little drawn out things like this on the first layer dont lift</p>

<p>i wrecked mine pulling it off the bed :(<br>could you make the back a little thicker?</p>

<p>Ok, what kind of printer are you using?  PLA or ABS?<br>When I printed mine, I had to lower my Z-Offset to get a nice 'stick' for the first layer.  My first attempts peeled up a bit also.<br>Next I ran my bed at 90C to assist with adhesion.  When I removed it, I let the bed cool right down.  and I find that as it cools.  Blowing on the plastic helps cool it a little faster, and it seems to contract a bit and help it pop up.   I just worked at it with a thin scraper slowly and it popped up no problem.</p>

<p>However, I will be posting an update within the next day or two, I'll consider making the back a little thicker for you.</p>

<p>PLA. Did the layer height at .32, 80c for the bed (first layer) 192c for the extruder</p>

<p>That looks god damn amazing. Please consider posting a version with the scorpion facing towards the bottom of the phone too.</p>

<p>Thanks, I'll see what I can do.  Just out of curiosity, whats the difference?  lol</p>

<p>I just would prefer it when I finally get a change to print things. It just seems more common to me. (I did a google image search of scorpions, 80% were facing downward or angled downwards) Maybe it's that it looks like it's defending the person behind it when facing downwards as oppose to attacking them whilst upwards. Chalk it up to personal preference.</p>