Panelolu mod with PCB by Pietruchass
by niceCircuits, published
Mod of Panelolu. Panel with LCD, SD-card reader, encoder, power indicating LED, reset button and buzzer (only works with RAMPS). Can be used with Sanguinololu or RAMPS.
Has build-in SD-card connector. Accepts standard size SD-CARD, not only micro-SD.
There are two possible methods of assembly:
- with card on right
- with card on top
There are two corresponding versions of case attached
Assembly instructions in attached pdf file. No mounting parts yet, you can use stands from http://www.thingiverse.com/thing:28332
Schematic and board files made in Eagle 6.3 Light.
Update: new assembly instructions with photos how to connect board to Sanguinololu properly. Updated case models.
Bug fix: There was error on first revision of RAMPS adapter. Fixed in rev.0.2 of PCB. If you have rev.0.1 PCB - there are instructions to fix attached.
Bug fix: MCP1702 with 100n capacitors can be unstable, capacitors are changed to 1u.
Liked ByView All
Give a Shout Out
Panelolu mod with PCB by Pietruchass by niceCircuits is licensed under the GNU - GPL license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure niceCircuits would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).