Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
Sushimaker rice extruder
4
Likes
224
Downloads
1025
Views
Published on November 23, 2012
Description
Ricepress with triple helix extruderstamp
Size up to the lengh needed...
to the available nori size in your country
Standard PLA and ABS are not very Foodgrade.
Size up to the lengh needed...
to the available nori size in your country
Standard PLA and ABS are not very Foodgrade.
Instructions
Print with thick walls and little fill.
bolt hinge together.
doesnt actually need front bolts.
Standard PLA and ABS are not very Foodgrade.
I suggest you coat the Prints with something better... or just live with it and dont make sushi every day.
In case..
Fill both open halves with rice and fillings. slightly too much.
Close system
place it vertical and apply some pressure with the stamp.
Extrude the rice onto the nori leaves
bolt hinge together.
doesnt actually need front bolts.
Standard PLA and ABS are not very Foodgrade.
I suggest you coat the Prints with something better... or just live with it and dont make sushi every day.
In case..
Fill both open halves with rice and fillings. slightly too much.
Close system
place it vertical and apply some pressure with the stamp.
Extrude the rice onto the nori leaves
You must be logged in to post a comment.
License
More from yzorg
More from Kitchen & Dining
hm.. maybe the stamp is a bit overkill.
but i will print this