by oski, published
This is a simple tray designed to hold six large eggs. Enjoy!
The model is designed with a 3mm thick wall. I printed my first part at 80% fill, 2 shells, and 40mm/s. The total print time was 15 hours. The duration could likely be shortened by reducing the fill to approximately 30%, feel free to experiment!
My print had trouble with warping, my build platform was set to 110. I printed with the egg surface facing the build platform.
Liked ByView All
Give a Shout Out
Egg Tray by oski is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure oski would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).